The racing-two-seater EB29DElektro

Among our clients arose the idea of a self launching glider with electric(E)-engine which ideally would combine the performance of the EB29 with a seat for a Co-pilot.
Based on the single seater EB29 we stretched the fuselage in the cockpit area by only 25cm and increased the width by a few centimeters to generate the room for a Co-pilot. In addition we redesigned the complete control mechanism in the cockpit area in order to assure comfortable seating positions for the pilots in this very slim and elegant fuselage together with an ergonomic cockpit layout.
The result is the EB29D, a self launching racing-two-seater. Finally the conventional Solo engine was replaced with the newly developed and powerful Emrax E-engine. So the EB29 was transformed into the racing-two-seater EB 29DElektro with E-engine which truly defines a new benchmark.

The Emrax E-engine  made by Enstroj and the AC inverter made by Piktronik are water cooled.
For the battery system latest generation Panasonic Litium-Ion-Accumulators were used and placed  in the wings.
The engine- and accu- monitoring system EMD was designed in cooperation with  Schicke-electronics.
Werner “micro” Scholz of SFL GmbH did the computation work regarding aerodynamics and structural strength as well as the compilation of the certification documents , as he has always done since the days of the development of the EB28.

The new EB29DElektro made its successful maiden flight on 12th of November 2012 on the airstrip of Büchig near Ostheim vor der Rhön. We also offer this new glider in the Version EB29D, equipped with the well proven conventional powerplant based on the Solo-engine.

See also Aerokurier Issue 7/2013

EB29
EB29DElektro racing-two-seater

in a nutshell:

  • Steigleistung je Akkufüllung 3500 bis 4000 m gesamt
  • Starverhalten und Startstrecke vergleichbar der EB29
  • optimized for best aerodynamics the edition-wing with new winglets makes higher cruise speeds as possible as superb slow speed capabilities
  • variable wing span from 28.3 to 29.3 m allows accomodation to various weather conditions by a simple change of the wingtips
  • minimized drag due to the smaller wetted surface enables improved performance in comparison to the two-seater EB28
  • comfortable handling in flight and on the ground due to the electric gear retraction, the 2-diameter main bolts for better wing assembly, the large and sprung wheel, the generous cockpit with forward hinged canopy, the optimized and ergonomically placed systems for engine operation, flaps and control system
  • type certification according to CS-22, the highest safety standard for glider construction

See also Aerokurier Issue 7/2013

Technical Data

wing span25,3 m28,3 m
wing area15,4 m²16,5 m²
aspect ratio41,648,5
fuselage length8,25 m8,25 m
hight (fin plus tail wheel)1,8 m1,8 m
emty mass with minimal equipmentca. 680 kgca. 690 kg
maximum ramp weight900 kg900kg
wingloading minimumca. 49,0 kg/m²ca. 46,0 kg/m²
wingloading maximum58,5 kg/m²54,5 kg/m²
maximum speed280 km/h280 km/h
  
best glide ratioca. 63ca. 66
Emrax engine53kW (72PS)53kW (72PS)
FRP-prop Binder BM-G1d 1,6 md 1,6 m
rate of climb with engine (according ICAO standard athmosphere)3 m/s3 m/s
cruise speed in powered flightmax.160 km/hmax.160 km/h
batteri cpacity77Sh 25kWh77Sh 25kWh
Datasheet  

description

fuselage:

  • body shell made of fibre reinforced plastic (CFK and aramide)
  • cockpit suitable for pilots up to 185 cm in the front seat and little less in the rear seat
  • forward swinging canopy including one sliding window with integrated ventilation scoop
  • instrument panel moves upward with the canopy
  • TOST-safety release couplings (for aero tow or winch tow)
  • total pressure probe in tip of the fuselage nosecone
  • adapter in the fin to fit TEK probe
  • static pressure probes (for air speed indicator and altimeter) on both sides of the tail boom

cockpit:

  • removeable bucket seats with parachute mould in the front seat
  • safety belts
  • seat cushions
  • ram air entrance in the nosecone of the fuselage for ventilation and defogging of the canopy

controls:

  • rudder control pedals adjustable in flight
  • control rods made of CFK
  • electrically adjustable trim with the operating switch on each control stick
  • automatic elevator connection

landing gear and brake:

  • rubber suspended, electrically operated retractable landing gear
  • hydraulic disk brake
  • tail wheel

power plant:

  • power plant retractable into the fuselage
  • E-engine Emrax UHP LC, watercooled
  • rated power on take off 53 kW (72hp) at 2200 rpm 
  • max continuous power 40 kW at 2000 rpm
  • voltage 380 V DC
  • engine monitoring system in instrument panel
  • composite propeller Binder BM-G1-160-R-120-1

accumulators:

  • in the fuselage for Avionics and engine control (Sony Li-Mg 14,4V DC, 56 Ah)
  • in the wings for E-engine (Panasonic Li-Ion 400V 72 Ah 25kWh)

antenna:

  • radio antenna in fin

wing:

  • 8-part wing with boundry layer control on the lower wing surface
  • wingtip with winglets for wingspan 25,3 m or 28.3 m 
  • built using high modulous (HM) carbon fibre
  • aileron and flap gaps covered with Mylartape
  • double panel air brakes on the upper wing surface

water ballast:

  • water ballast tank in the fin to allow for compensation of CG-movement using water ballast in the wings

finish

  • white two component plyester coat or PU-coat

 

To minimize the structural weight the main parts of wing and fuselage are built using the vacuum suction method. This allows the utmost possible spread in wing loading.

 

EB29DElektro


EM 2023 Leszno Poland

21th FAI European Gliding Championships -... [more]

DM 2023 Bayreuth

The German Nationals 2023 of the Open Class, the... [more]

WGC 2022 Szeded

37th FAI World Gliding Championships 2022 –... [more]

Binder Motorenbau GmbH
Alter Frickenhäuser Weg 15
D-97645 Ostheim v. d. Rhön

Tel.: +49(0)9777 - 9200

binder.motorenbau(at)t-online.de

HB DE.21.G.0138
DE.CAO.0089
LBA.MG.0534